If a signal is sampled below the Nyquist rate, the result is:

Aliasing, where false lower frequencies appear

The resolution of an ADC (the voltage of one step) is given by:

Full-scale voltage divided by 2 to the power n

Increases the levels from 256 to 1024 and improves resolution

The rounding error of each sample, at most half a step

Each bit contributes in proportion to its place value

Virtual earth of a summing amplifier

Uses only two resistor values that are easy to match

Smooth the steps into a continuous waveform

Remove frequencies above half the sample rate before sampling

12questions. Pick an answer and you'll see why right away.

The Nyquist criterion states that a signal must be sampled at a rate of at least:
If a signal is sampled below the Nyquist rate, the result is:
An n-bit analogue-to-digital converter divides the input range into:
The resolution of an ADC (the voltage of one step) is given by:
Increasing the number of bits of an ADC from 8 to 10:
Quantisation error is:
In a weighted-resistor DAC, the resistors are binary-weighted so that:
A weighted-resistor DAC feeds each bit into the:
The main advantage of the R-2R ladder DAC is that it:
The raw output of a DAC is:
A low-pass reconstruction filter is placed on a DAC output to:
An anti-aliasing filter is placed before an ADC to: